The preparation of MC is to react cellulose with an alkali solution to generate alkali cellulose and then respond with methyl chloride under a certain pressure and temperature to obtain a crude product, which is separated, washed, dried, pulverized, and packaged to get the product. The preparation methods include the gas phase method, liquid phase […]
The concentration of the methylcellulose solution, whether it’s dissolved in water or organic solvents, is a crucial factor that should be determined based on the specific application and the type of product chosen. For low viscosity products (15~100mPa·s), a concentration of 10% and 15% is recommended, while high viscosity products (400 75000mPa ·s) should not exceed […]
Waterproof mortar can be divided into two categories: ready-mixed and dry mortar, according to its supply form (whether water has been added for mixing). The production processes of the two are also different. In the past, mortars were mixed on construction sites using hand batching and free-fall mixers. This method, while requiring a small investment, […]
Methyl cellulose ether is one of the essential additives in dry-mixed mortar products. It is used with Redispersible Polymer powder to modify ordinary cement mortar and gypsum-based products synergistically. The enormous contribution of methyl cellulose ether is its water retention and thickening effect. For example, an aerated concrete block is a lightweight new wall material […]
The concentration of the methylcellulose solution, whether it’s dissolved in water or organic solvents, is a crucial factor that should be determined based on the specific application and the type of product chosen. For low viscosity products (15~100mPa·s), a concentration of 10% and 15% is recommended, while high viscosity products (400 75000mPa ·s) should not exceed […]
Waterproof mortar is different from concrete as a structural material. In addition to the required strength, waterproof mortar is mainly required to meet the functions of water retention, bonding, waterproofing, crack resistance, impact resistance, freeze-thaw resistance, high-temperature resistance, and thermal insulation, so the product’s composition is relatively complex. The development and production of waterproof mortar […]
Methyl cellulose is a general term for a type of cellulose ether whose primary substituent is methyl, including single ether methylcellulose (MC), hydroxyethyl methyl cellulose (HEMC), hydroxypropyl methylcellulose Cellulose mixed ethers such as hydroxy butyl methylcellulose (HPMC), hydroxy butyl methyl cellulose (HBMC), ethyl methyl cellulose (EMC) and carboxymethyl methyl cellulose (CMMC) all have properties similar […]
(1) Workability of waterproof mortar mixture With good workability, the mortar mixture will not quickly produce delamination and segregation; it can be spread into a uniform thin layer on the rough masonry surface and connected well with the base layer, bonding to facilitate construction operations and ensure project quality. The workability of mortar mixtures is […]
The mortar used to make the waterproof layer of buildings is called waterproof mortar. Waterproof mortar is an essential rigid waterproof material that can be used to improve the compactness of the mortar and achieve the purpose of impermeability and waterproofing through strict operating techniques or by incorporating appropriate amounts of admixtures with waterproof properties, […]
Cellulose ether, a product obtained by etherification of insoluble and infusible cellulose, has many important properties, including solution thickening, good water solubility, suspension or latex stability, protective colloid effect, film-forming property, water retention properties, adhesive properties, non-toxic, tasteless, biocompatibility; thixotropy, etc. In addition, cellulose ethers have many unique properties: thermal gelling, surface activity, foam stability, […]
